Samsung Galaxy S20 series is the latest premium and flagship smartphone from Samsung. Samsung unveiled the Galaxy S20 series, i.e., Galaxy S20, S20 Plus, and S20 Ultra as its latest flagship family at the Galaxy Unpacked 2020 event in San Francisco, California. The Galaxy S20 series ships with Qualcomm’s latest Snapdragon 865 chipset, which features more powerful image processing, a new fifth-generation AI Engine, better power efficiency, basically everything you could ask for in a mobile processor.
In this article, we’ll show you the options that you can do to Fix when Galaxy S20 facing calling issue after software update in straightforward steps.
Also Read
How to Fix If Galaxy S20 or S20 Ultra can’t make any calls [Voice Calling not working]
Fix, Galaxy S20 facing calling issue after software update
Verify signal strength
In a lot of network issues, poor or weak signal is to blame. If your Galaxy is showing No Service all the time recently, be sure to check how the signal bars are showing on your device. Anything lower than 3 bars is not good and can indicate a network issue.
If you are inside a building, try to go out and see if No Service goes away. If you are traveling by car, it’s possible that you may be transiting a dead spot. What you want to do is to move a known well-covered area. If No service remains, there may be an issue with your Galaxy S20. Continue troubleshooting it by following the steps below.
Simple Reboot or Forced reboot
Well, I think you already know how to restart your phone. So just restart the device and see whether it solves the issue or not. Restarting a device is always an ultimate solution for any issue. Not only Pixel but this applies to each and every electronic device. I used to tell my mom to restart her device if she faces any issue with her smartphone.
Well if you still need to know how to restart then, here is it: Press your phone’s power button. On the screen, tap Restart.
The other way of the reboot is as follows:
- Press and hold the Volume Down button.
- While holding it down, press and hold the Power key.
- Keep the button held for 10 seconds, it will be restarted automatically.
If this doesn’t work then head to the next method.
Rebooting your device regularly at least once every week can be beneficial. If you tend to forget things, we suggest that you configure your phone to reboot on its own. You can schedule it to do this task by doing these steps:
- Open the Settings app.
- Tap Device Care.
- Tap the 3-dot at the top.
- Select Auto restart.
Troubleshoot Phone App
Force Quit SIM App
This is usually recommended to fix minor app bugs. There are two ways to do this.
Method 1: Close an app using Recent Apps key
- On your screen, tap the Recent Apps soft key (the one with three vertical lines on the left of the Home button).
- Once the Recent Apps screen is shown, swipe left or right to look for the app. It should be here if you managed to run it previously.
- Then, swipe up on the app to close it. This should force close it. If it’s not there, simply tap the Close All app to also restart all apps.
Method 2: Close an app using App Info menu
- Open the Settings app.
- Tap Apps.
- Tap the More settings icon (three-dot icon, upper right).
- Tap Show system apps.
- Find and tap the app.
- Tap Force Stop.
Clear SIM app cache
- Open Settings from either Quick Nav menu or the launcher.
- Tap Apps.
- If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
- Select Show system apps.
- Find and tap the appropriate app.
- Tap Storage.
- Tap the Clear Cache button at the bottom.
Delete SIM app data
- Open Settings from either Quick Nav menu or the launcher.
- Tap Apps.
- If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
- Select Show system apps.
- Find and tap the appropriate app.
- Tap Storage.
- Tap the Clear Data button.
Update apps
To check for Play Store app updates on your Galaxy:
- Open Play Store app.
- Tap More settings icon at the upper left (three horizontal lines).
- Tap My apps & games.
- Tap Update or Update All.
If you are on Cellular Data connection, we suggest that you update via wifi only to avoid additional charges. Here’s how:
- Open Play Store app.
- Tap More settings icon at the upper left (three horizontal lines).
- Tap Settings.
- Tap App download preference.
- Select Over wifi only (select Over any network if you don’t have wifi).
- Tap Done.
Make sure also to keep your apps updated all the time by enabling auto-update option.
Advertisement
- Tap Auto-update apps.
- Tap Over wifi only (select Over any network if you don’t have wifi).
- Tap Done.
Update to Latest Software
- Open Settings from either Quick Nav menu or the launcher.
- Go to the More tab, then tap on About device.
- Tap on the Software update.
- If a system update is available, you’ll see the option on the screen. Tap Download and Install.
- If your system is up to date, you will see a message stating that the system is up to date.
That is all. You have successfully checked for a system update on your Samsung Galaxy S20 (Plus) and S20 Ultra.
Here are a few things that are needed to take care while updating your Samsung Galaxy S20 (Plus) and S20 Ultra or any device:
- Your device must be connected to the internet.
- Your device must have enough space to download the update.
- Your device should have enough charge, more than 50% to install the update.
Reset Network Settings
- Open Settings from either Quick Nav menu or the launcher.
- Scroll down and tap on General management.
- Then tap on Reset.
- Finally, tap on Reset network settings.
- Then tap on Reset settings.
- Confirm with your lock screen password when prompted.
Reset app preferences
- Open the Settings from the launcher.
- Tap Apps.
- Tap on More settings at the upper right (three-dot icon).
- Select Reset app preferences.
- Restart your Galaxy and check for the problem.
Clear Cache from Recovery Mode
In case you don’t know what is recovery, the first thing the bootloader rings up is the recovery. Recovery Mode refers to a special bootable partition, which contains a recovery application installed in it. And you can fix some problems with your phone. Follow the steps to clear cache from recovery mode:
- Turn off your phone.
- Once it is turned off. Press and hold the power/Bixby and volume down button simultaneously until the Android logo pops up.
- When the green Android logo displays, release both buttons.
- The Recovery screen menu will now appear
- Use the Volume button to go to Wipe Cache Partition then press the Power button to confirm the selection.
- Wait until your device wipes out all cache or temporary data from the system partition.
- Press the Power button again to reboot the device.
This clears all the temporary data from the device. And then it works like new.
Troubleshoot apps in Safe Mode
In case you don’t know what is safe mode, in safe mode, the system temporarily disable all third-party applications you installed on your device. By doing this we can figure out which app is occurring the problem. Follow the below step to turn Safe Mode on:
- Turn OFF the device.
- Press and hold your device’s Power button till the model name screen.
- When the SAMSUNG logo appears on the screen, release the Power key.
- Immediately after releasing the Power key, press and hold the Volume down key.
- Continue to hold the Volume down key until the device finishes restarting.
- Safe mode will display in the bottom left corner of the screen.
- Release the Volume down key when you see Safe Mode.
After figuring out the apps which are creating the problem, follow the below steps to uninstall it(if required):
- Open Settings from Launcher.
- Tap on Apps.
- Tap See All Apps.
- Tap an app that you want to uninstall
- Tap Uninstall.
- Tap OK to confirm.
Factory Reset
From the Settings menu:
- Open the Settings from the launcher.
- Scroll to and tap General management.
- Tap Reset.
- Select Factory data reset.
- Tap Reset to continue.
- Tap Delete All to confirm the action.
From Recovery:
- Turn off your phone.
- Once it is turned off. Press and hold the power/Bixby and volume down button simultaneously until the Android logo pops up.
- When the green Android logo displays, release both buttons.
- The Recovery screen menu will now appear
- Use the Volume Down button until you are highlighting ‘Wipe data/factory reset.’
- Press the Power button to select ‘Wipe data/factory reset.’
- Use Volume Down to highlight Yes.
- Press the Power button to confirm the action to clear your phone data.
Do you own a Galaxy Device, or any Android device and need these types of simple tutorials? Then stay tunned to GetDroidTips’ Android Tips & Tricks column because many simple tutorials for Galaxy are coming soon.
Disclaimer
If you have any queries regarding this, the comment section always available for you.
- Galaxy S20 Waze Not Getting GPS Signal: How to Fix?
- After Software Update, MMS causing trouble on Galaxy S20: How to Fix?
- How to Fix If Internet Data Problem on Galaxy S20 after Software update?
- How to Fix if Touchscreen is not working on Galaxy S20, S20+ or S20 Ultra?
- How to add or remove Watermark on Galaxy S20 Photos